★★★★★  

T-06SS 36V/48V KT Dual Motor Driving Brushless Sine Wave Controller

1--Rate Voltage:36V/48V

2--Rated Current:8A+8A

3--Maximum Current:17+17A

4--Low Voltage Protection:DC30/40±0.5V

5--Speed Set:1-4.2V

6--Brake input: Low-level

7--Suitable for 250-350W Sensor motor,Two Motors need with same power,same voltage, same RPM;Motor cable should be 9pins then can fit.

8--Dimension:167*52*32mm

Note:This controller is KT brand and is only compatible with KT Display; It is not compatible with display from other brands.

Controller can fit Bafang/AKM/TBK/Xofo/Xiongda/MXUS/Shengyi 250W-350W Motor.

If your motor paired with this controller produces abnormal noise, you need to adjust the parameters through the KT display:

1: Adjust the P1 parameter, P1 = motor reduction ratio * number of magnet steel;

2: Adjust the display motor phase,setting: C2 = 1

Technical Parameter：

Matching battery voltage 36V-48V

Product Features：Use imitate torque control mode to help achieve a smooth start-up of the vehicle, the power-assist drive will be smooth and natural.Electric power assist is with fast response and always consistent with the rider’s pedal action to achieve the effect of the torque boost.

With multiple protection features such as stalled, over-current, over-temperature, over-voltage, under-voltage, speed, lack of phase and so on to protect the safety of vehicle electronic control systems and traffic.

★★★★★  

A--KT LCD3,KT LCD8H, KT LCD8S, KT LCD5, KT-LCD4,KT LED900S,LCD9 ,LCD10H,LCD11,TF01,TF02,TF04,LED890,LED900S display

B--Normal brake, Hydraulic brake sensor

C--Wuxing 108X thumb throttle,Wuxing 130X thumb throttle,130D Thumb Throttle,TF158 Throttle,Twist Grip Throttle,TBK-C11 Throttle

D--5PAS, 8PAS, KT-V12L PAS, KT-D12L,TBK-DH12L/R PAS

E--Speed sensor, King Speed sensor

F--HWBS

★★★★★  Contact us NOW!

Email: topbikekit@hotmail.com

Whatsapp:+86 13535572569